Diffuser factory in China? The air outlet is made of aluminum alloy, ABS and wood. ABS material is recommended, without deformation and condensation; The second is aluminum alloy, which is cost-effective. Wood is not recommended unless the effect is required. In fact, in addition to these, there are also electric air vents and linear air vents. The former is of average appearance, while the latter is really expensive. The extra price can upgrade the bathroom hardware of the family. Find more information at diffuser supplier.
Production process: It is generally used for the air return outlet, which is often used with the filter screen as the air return outlet. It can also be equipped with a multi-leaf split control valve to control the air volume. The angle of the shutter can be adjusted at any angle from 0 to 90 °. It can be divided into two types: FK-2 and FK-20. The difference is that the dimensions of the outer frame and blade are different. The FK-2 type has a wide frame and a wide blade, and the others are the same. FK-2a type or FK-20a type movable core single-layer shutter vent is movable core type, which is convenient for cleaning the filter screen and can also be used as an access door. It has a beautiful appearance and is convenient for maintenance.
The supply air diffuser has the function to take air from the outside environment and let it pass through it,then enter the indoor atmosphere. This process not only helps in enhancing HVAC performance but reduces energy wastage as well. With a damper, the air diffuser can control the volume of air flowing into a room or area you have chosen and helps in controlling the direction of airflow. When air coming directly from the air ducts sometimes causes noise. The air diffuser also can reduce noise as air comes out of the vents in a minimum amount in different directions which makes the noise process less.
What is a damper? The damper is also known as a volume-directing damper. It is a movable plate fit to the air vent diffuser and grilles to control airflow volume and direction or installed in the ductwork to cut or regulate airflow to specific areas. Dampers are often used in ventilation ducts to create different airflow zones in a building. A good quality damper also helps in maintaining the desired level of humidity and temperature throughout the area.
Precautions for installation of air conditioner vent: Do not set the lamp slot at the air outlet of the air conditioner. It is easy to block the hot air from reaching the personnel activity area, affecting the heating effect. According to experience and test data, when heating in winter, the horizontal shutter is adjusted to 45 degrees, which is a suitable angle. If it is too high or too low, the heating effect may be affected. The air outlet of the air conditioner is large and easy to accumulates dirt, which affects the air outlet temperature and beauty of the air conditioner. Users should clean the air outlet regularly to keep it clean and ventilated. Discover even more details at https://www.chinaventech.com/.